DATABASE PRODUCTS PRINTOUT
FURNITURE/FOLDING CHAIRS
Drake Corp. was the first to introduce high quality resin event chairs to the contract market.
The material used at Drake's, a composite multi-layer techno-polymer, allows the manufacturing of special event resin chairs that are the strongest (tested at 500lb.) and the lightest (10lbs, only) at the same time on the market.
No one has been able so far to deliver a plastic chair that is as strong as Drake's, and so light that it makes transportation, storing and set up for events as cheap or as easy.
Now you can have more than folding chairs, check out our furniture section
link
|
CHIP resin folding and stacking chairs
***CHIP folding and stacking chairs***
***10 lbs. including padded seat.
***Most similar to wood shape
***Available in White, Black, Forest Green and Light Brown color
***Made in the USA
PLEASE NOTE THAT DRAKE's WHITE IS SO ULTRA WHITE, OTHERS CANNOT DUPLICATE IT EVEN WITH BLEACH!!!
Our chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple. They are strong, durable, weatherproof, UV protected, don't need painting and require very little maintenance.
Bi-component resin made with gas assist technology, means that they are built with two materials that have different properties working as one: extreme UV protection and strength.
BUY A SAMPLE ON-LINE or click on ask quote.
link
TECH DATA
|
|
SOLID...As a ROCK
The LOAD rests on the two bars supporting the seat, NOT on the screws as on similar chairs.
All Drake folding chairs must comply with our 500lb. of static vertical weight standard. FEDERAL SPECIFICATION AA-C-291F
|
|
MATERIAL
The material used at Drake is a composite multi-layer techno-polymer which allows the manufacturing of the strongest (tested at 500lb.) and lightest (10lbs, only) special event resin chairs on the market.
CHIP chairs are manufactured with a TWO COMPONENT RESIN (CO-INJECTION) plus GAS system - the highest standards in plastic manufacturing.
The result is an outer, smooth all weather resistant aesthetic skin, and an inner expanded closed cell modified resin with high mechanical resistance that behaves like a bone and gives exceptional strength to the chair.
|
|
COMPARATIVE TEST
Chip chairs are strong, no doubt, they are indeed performing better than chairs with metallic reinforcement both in static weight tests and dynamic weight tests (=Chair Drop Functional Load A 300 lb weight is positioned 6 above the seat of the chair and allowed to free-fall onto the center of the seat).
We took the best chair with metallic reinforcement from the competition, and here are the testing results:
STATIC/vertical static load testings:
Chip chairs average load before failure: 2200 lbs.
Competitors best chairs chairs average load before failure: 1500 lbs.
DYNAMIC/with a 300lbs. weight drop @ 6" above center seat:
100% Chip chairs remain intact
60% of the Competitors best chairs fail (the seat breaks)
For more information, Please read the detailed report on Chairs with metallic inserts:
What About Competition: CHIP Testing
|
|
DIMENSIONS
Chair dimensions when folded:
17 3/8 x 35 x 2 1/3 [inches]
45 x 89 x 6 [cm]
net weight:
10 pounds including padded seat.
PATENTED STACKING SYSTEM WITH INTERLOCKING
STACK OF 25 CHAIRS: h=58.5
STACK OF 30 CHAIRS: h=70
STACK OF 50 CHAIRS: h=117
|
|
SHIPPING
Our Chip chairs, come in a box of 5.
Box Weight: [52 lb.] [23.5kg]
Box Dim.:
18 x 36 x 13 [inches]
46 x 91.5 x 33 [cm]
CLASS 85
|
|
SAMPLES
Samples come in a box of 1ea.:
18"x42"x3" at 11 pounds
|
|
FOLDING CHAIR CLEANING
We suggest water and mild soap to clean up dust and common everyday dirt.
When hard to clean marks are found on the WHITE chairs (only on white chairs!), SOFT SCRUB or an equivalent product will work just fine.
Steam cleaning could be performed from time to time and only when really needed. The operating 212ฐF-230ฐF temperature range is considered safe.
And....yes, Drake resin folding chairs can be washed in automatic chair washing machines.
|
|
FOLDING CHAIR HANDLING
Our chairs have been designed to be easily folded, stacked and moved in stacks.
A chair pallet protecting the first chair of the stack is a must.
At Drake, we supply chair dollies that roll on casters and chair pallets that can be used with hand truck for deliveries, or with pallet-jacks for warehouse moving of multiple stacks at a time.
We also suggest strapping and covering the stacks, to protect chairs during transportation.
We supply 2 different chair stack covers, which are strong, protective, and easy to use for every chair move (both to and from the customer or simply warehousing). One is water resistant, the other is not.
We do supply plastic bag rolls that cover the entire stack as well as boxes, as an economy packaging/warehousing system.
NOTICE: DO NOT USE COTTON COVERS WITH RESIN CHAIRS, as the static electricity produced by the two materials combined, attracts dust and dirt.
|
|
MAINTENANCE, REPAIR & WARNINGS
Buying our products means never having to paint a chair again. Because the colors of our products run all the way through them they will never need painting. The only ordinary maintenance required is cleaning.
Inspect and check the integrity of each chair every time before deploying it, making sure all bolts and parts are firmly tightened.
If any parts are missing, damaged, or worn, stop using the chair.
This chair is designed for seating one person at a time and for sitting only.
Do not stand on the chair.
Do not use it as a step ladder.
In the event of damages from extremely rough handling or improper use, do not attempt to glue broken parts back together.
**Call us at 732 254 1530 for spare parts**
We'll be there to assist you in the best way we can.
|
ACCESSORIES
|
|
DR chair pallet & for FOLDING chairs
One chair pallet fits up to 30 chairs. Secure the chairs to the pallet with straps before moving, making sure the strap works with the interlocking system of the chair.
material: thermoformed HDPE 0.220 thick sheet
capacity: 330 lb. distributed load
internal: 17.75 x 35.5
external: 18.25 x 36
straps: external
pallet feet: yes (built in)
long side clearance: 28 (pallet jacks)
short side clearance: chair trucks
casters: none
to be used with CHAIR TRUCKS or PALLET JACKS
|
|
RG chair tray, pallet & dolly for FOLDING chairs
Chair tray, basic configuration:
material: PP structural foam
capacity: 330 lb. distributed load
internal: 18 x 35
external: 18.5 x 35.5
straps: 1.25
to be used with HAND TRUCKS
Optionals
---------------------------
Chair pallet configuration:
tray + 4 pallet feet
long side clearance: 27.25 (pallet jacks)
short side clearance: 10.25
to be used with PALLET JACKS
---------------------------
Chair cart configuration:
tray + 2 casters 2.5 swivel + 2 pallet feet + lift jack
---------------------------
Chair dolly configuration
tray + 4 casters 2.5 swivel
|
|
HQ Stack Cover for Folding Chair
Nylon, with inner PVC coat.
Heavy duty water resistant chair stack cover, for transportation and storage.
Taylored for a 25 folding chair stack.
Lateral slit with Velcro eases up positioning of the cover on the stack.
Dim. 17 1/2 x 35 x 58 high
|
|
Economy Stack Cover for Folding Chair
Non-woven polyester material.
Breathable fabric.
52 lateral slit with Velcro eases up positioning of the cover on the stack and a Velcro buckle for extra security.
Bottom edge is hemmed for durability.
Dim. 18 x 35 1/2 x 58 high
|
|
Super Economy $aver
Bundle of 50 cardboard trays and a roll of 50 extra large bag stack covers.
Bundle of 50 Cardboard Trays
can be used to protect the first chair of the stack when storing chairs on a pallet.
Internal dimensions:
17 1/2" x 35 1/2"
Shipping bundle dimensions and weight:
61"x30" @ 60 lb.
Roll of 50 bag covers
40x20x72x0.015mil
Shipping box dimensions and weight:
7"x7"x42" @ 22 lbs
|
|
Chair truck
Strong sturdy, a major help in handling chairs. Every task involving moving chairs will be easier.
Please secure the chairs to the chair base or pallets before operating it.
4 pneumatic wheels/10 closed cell foam tires, ball bearing hubs
powder coated steel frame
expanded metal backguard & 54 aluminum fenders to protect load from rubbing on tires
34 long forks, 7/8 diameter, 14 3/4 apart, designed for heavy duty hauling
MAX LOAD: 750 lbs.
weight: 97 lbs.
Shipped via truck only, some assembly required.
|
|
Chair hand truck (single axle)
Our single axle chair handtruck is a good and cheaper alternative to a chair truck. Designed to lift heavy loads with minimum effort and transportation over rough pavement, down curbs, across lawns and up/down ramps. Folding forks allow shipment via UPS.
Specifications:
2 pneumatic wheels/10
Height: 65 Length: 37 (with forks open)
Width: 28 with pneumatic wheels
Weight: 40 lbs.
Shipped via UPS or via truck, some assembly required.
Box dimensions:
19 3/8 x 11 3/4 x 64 1/2
weight: 50 lbs.
|
|
Extra chair pads
The 1/4" flexible padded resin seat is more comfortable than the wood seat. It snaps in and snaps out in a flash without any tools or screws:
- do not warp with humidity
- more comfortable because of the flexibility of the material they are made of.
Available in white or black.
|
|
STRUCTURE resin folding and stacking chairs
***STRUCTURE folding and stacking chair.
***10 lbs. including padded seat.
***Solid material (no hollow core).
***Available in White, Black,
Redwood color frame with black pad
or Silver color frame with black pad.
***custom color available upon request
***Made in the USA
Our chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple. They are strong, durable, weatherproof, UV protected, don't need painting and require very little maintenance.
Newly modified upper back to match wood appearance.
Bi-component resin made, it means that they are built with two materials that have different properties working as one: extreme UV protection and strength.
BUY A SAMPLE ON-LINE or click on ask quote.
link
TECH DATA
|
|
SOLID...As a ROCK
The LOAD rests on the two bars supporting the seat, NOT on the screws as on similar chairs.
All Drake folding chairs must comply with our 500lb. of static vertical weight standard. FEDERAL SPECIFICATION AA-C-291F
|
|
MATERIAL
The material used at Drake is a composite multi-layer techno-polymer which allows the manufacturing of the strongest (tested at 500lb.) and lightest (10lbs, only) special event resin chairs on the market.
STRUCTURE chairs are manufactured with a TWO COMPONENT RESIN (CO-INJECTION) system, the highest standards in plastic manufacturing.
The result is an outer, smooth all weather resistant aesthetic skin, and an inner expanded closed cell modified resin with high mechanical resistance that behaves like a bone and gives exceptional strength to the chair.
|
|
DIMENSIONS
Chair dimensions when folded:
17 3/8 x 35 x 2 1/3 [inches]
45 x 89 x 6 [cm]
net weight:
10 pounds including padded seat.
PATENTED STACKING SYSTEM WITH INTERLOCKING
STACK OF 25 CHAIRS: h=58.5
STACK OF 30 CHAIRS: h=70
STACK OF 50 CHAIRS: h=117
|
|
SHIPPING
Our Structure chairs, come in a box of 5.
Box Weight: [52 lb.] [23.5kg]
Box Dim.:
18 x 36 x 13 [inches]
46 x 91.5 x 33 [cm]
CLASS 85
|
|
SAMPLES
Samples come in a box of 1ea.:
18"x42"x3" at 11 pounds
|
|
FOLDING CHAIR CLEANING
We suggest water and mild soap to clean up dust and common everyday dirt.
When hard to clean marks are found on the WHITE chairs (only on white chairs!), SOFT SCRUB or an equivalent product will work just fine.
Steam cleaning could be performed from time to time and only when really needed. The operating 212ฐF-230ฐF temperature range is considered safe.
And....yes, Drake resin folding chairs can be washed in automatic chair washing machines.
|
|
FOLDING CHAIR HANDLING
Our chairs have been designed to be easily folded, stacked and moved in stacks.
A chair pallet protecting the first chair of the stack is a must.
At Drake, we supply chair dollies that roll on casters and chair pallets that can be used with hand truck for deliveries, or with pallet-jacks for warehouse moving of multiple stacks at a time.
We also suggest strapping and covering the stacks, to protect chairs during transportation.
We supply 2 different chair stack covers, which are strong, protective, and easy to use for every chair move (both to and from the customer or simply warehousing). One is water resistant, the other is not.
We do supply plastic bag rolls that cover the entire stack as well as boxes, as an economy packaging/warehousing system.
NOTICE: DO NOT USE COTTON COVERS WITH RESIN CHAIRS, as the static electricity produced by the two materials combined, attracts dust and dirt.
|
|
MAINTENANCE, REPAIR & WARNINGS
Buying our products means never having to paint a chair again. Because the colors of our products run all the way through them they will never need painting. The only ordinary maintenance required is cleaning.
Inspect and check the integrity of each chair every time before deploying it, making sure all bolts and parts are firmly tightened.
If any parts are missing, damaged, or worn, stop using the chair.
This chair is designed for seating one person at a time and for sitting only.
Do not stand on the chair.
Do not use it as a step ladder.
In the event of damages from extremely rough handling or improper use, do not attempt to glue broken parts back together.
**Call us at 732 254 1530 for spare parts**
We'll be there to assist you in the best way we can.
|
ACCESSORIES
|
|
Chair link and spacer: you need space!!!
Sometimes linking chairs together is mandatory. Whenever you link chairs without spacing, you oblige guests to
squeeze in a 17/18 chair. They need space!!!
With our link & spacer device, you can give 3 more comfort to your
customers and guests so that the feeling is to sit on a wider space.
FEATURES
Snap on, NO TOOLS required
Leaves 3 between linked chairs
Stacks for storage
Engraved 3 3/4 x 1 1/2 Drake Logo could be replaced by your logo for a one time set up fee
Placeholder can be used with business card, advertising card, reserved seating card, row and seat number card, event card. Customize the event/seating using Averyฎ Clean Edge Business cards 2x3 1/2
|
|
DR chair pallet & for FOLDING chairs
One chair pallet fits up to 30 chairs. Secure the chairs to the pallet with straps before moving, making sure the strap works with the interlocking system of the chair.
material: thermoformed HDPE 0.220 thick sheet
capacity: 330 lb. distributed load
internal: 17.75 x 35.5
external: 18.25 x 36
straps: external
pallet feet: yes (built in)
long side clearance: 28 (pallet jacks)
short side clearance: chair trucks
casters: none
to be used with CHAIR TRUCKS or PALLET JACKS
|
|
RG chair tray, pallet & dolly for FOLDING chairs
Chair tray, basic configuration:
material: PP structural foam
capacity: 330 lb. distributed load
internal: 18 x 35
external: 18.5 x 35.5
straps: 1.25
to be used with HAND TRUCKS
Optionals
---------------------------
Chair pallet configuration:
tray + 4 pallet feet
long side clearance: 27.25 (pallet jacks)
short side clearance: 10.25
to be used with PALLET JACKS
---------------------------
Chair cart configuration:
tray + 2 casters 2.5 swivel + 2 pallet feet + lift jack
---------------------------
Chair dolly configuration
tray + 4 casters 2.5 swivel
|
|
HQ Stack Cover for Folding Chair
Nylon, with inner PVC coat.
Heavy duty water resistant chair stack cover, for transportation and storage.
Taylored for a 25 folding chair stack.
Lateral slit with Velcro eases up positioning of the cover on the stack.
Dim. 17 1/2 x 35 x 58 high
|
|
Economy Stack Cover for Folding Chair
Non-woven polyester material.
Breathable fabric.
52 lateral slit with Velcro eases up positioning of the cover on the stack and a Velcro buckle for extra security.
Bottom edge is hemmed for durability.
Dim. 18 x 35 1/2 x 58 high
|
|
Super Economy $aver
Bundle of 50 cardboard trays and a roll of 50 extra large bag stack covers.
Bundle of 50 Cardboard Trays
can be used to protect the first chair of the stack when storing chairs on a pallet.
Internal dimensions:
17 1/2" x 35 1/2"
Shipping bundle dimensions and weight:
61"x30" @ 60 lb.
Roll of 50 bag covers
40x20x72x0.015mil
Shipping box dimensions and weight:
7"x7"x42" @ 22 lbs
|
|
Chair truck
Strong sturdy, a major help in handling chairs. Every task involving moving chairs will be easier.
Please secure the chairs to the chair base or pallets before operating it.
4 pneumatic wheels/10 closed cell foam tires, ball bearing hubs
powder coated steel frame
expanded metal backguard & 54 aluminum fenders to protect load from rubbing on tires
34 long forks, 7/8 diameter, 14 3/4 apart, designed for heavy duty hauling
MAX LOAD: 750 lbs.
weight: 97 lbs.
Shipped via truck only, some assembly required.
|
|
Chair hand truck (single axle)
Our single axle chair handtruck is a good and cheaper alternative to a chair truck. Designed to lift heavy loads with minimum effort and transportation over rough pavement, down curbs, across lawns and up/down ramps. Folding forks allow shipment via UPS.
Specifications:
2 pneumatic wheels/10
Height: 65 Length: 37 (with forks open)
Width: 28 with pneumatic wheels
Weight: 40 lbs.
Shipped via UPS or via truck, some assembly required.
Box dimensions:
19 3/8 x 11 3/4 x 64 1/2
weight: 50 lbs.
|
|
Extra chair pads
The 1/4" flexible padded resin seat is more comfortable than the wood seat. It snaps in and snaps out in a flash without any tools or screws:
- do not warp with humidity
- more comfortable because of the flexibility of the material they are made of.
Available in white or black.
|
|
ISPRA resin folding & stacking chairs, by Rovergarden
Italian Design
Comfortable
Strong and Durable
Easy to clean,
never needs painting
Easily stackable vertically
as well as horizontally
Ispra is a STRONG 11 pound bi-component structural resin folding chair, which folds perfectly flat to 2 3/4.
Guaranteed resistant to all weather conditions and UV rays, it is easily cleaned using water and a neutral liquid detergent.
Ideal for any outdoor dining area.
Easy to handle, low maintenance, stacking and interlocking.
Available in White and Hunter Green.
link
TECH DATA
|
|
MATERIAL
Material
Structural bi-component resin is formed with two materials:
A- a modified aesthetic compact resin
B- a modified resin with expanded
closed cells, with extreme absorbing
properties against movement.
The compact material of the outer surface highlights the aesthetic appeal as resisting U.V. rays, extreme heat, cold, water, humidity and every day use.
The expanded closed cell material on the inside has the ability to withstand stress, tension and unavoidable movements during use.
The structural bi-component resin remains undistorted, insuring maximum resistance from both materials.
Bi-component resin is a recyclable material.
Ispra meets and exceeds the standards set forth in ISO 7173, ANSI/BIFMA X5.1-1993 and ANSI/BIFMA X5.4-1997. The product specifically will meet or exceed the 225 lbs. functional load as well as the 300 lbs. proof load requirements of the test.
|
|
DIMENSIONS and WEIGHTS
Seat dim.: 15x16
Seat height: 17
Weight: 11 lbs.
|
|
INTERLOCKING BUTTONS
Each chair has 4 locking buttons for easy stacking.
|
|
SAMPLES
Samples are shipped 2 chairs per box.
|
|
SHIPPING
We ship 25 Ispra chairs on a resin base which can be easily handled with a handtruck or a palletjack.
Stack Dim.: 18 x 35 x 71h
Four legs can be attached to the base for convenient palletizing.
Four casters may be used to convert the resin base into an easy move around Ispra dolly (casters NOT included)
|
ACCESSORIES
|
|
Ispra linking armrest
One or more chairs can be aligned and linked with our linking armrest. Snap in - snap out no tools required.
|
|
RG chair tray, pallet & dolly for FOLDING chairs
Chair tray, basic configuration:
material: PP structural foam
capacity: 330 lb. distributed load
internal: 18 x 35
external: 18.5 x 35.5
straps: 1.25
to be used with HAND TRUCKS
Optionals
---------------------------
Chair pallet configuration:
tray + 4 pallet feet
long side clearance: 27.25 (pallet jacks)
short side clearance: 10.25
to be used with PALLET JACKS
---------------------------
Chair cart configuration:
tray + 2 casters 2.5 swivel + 2 pallet feet + lift jack
---------------------------
Chair dolly configuration
tray + 4 casters 2.5 swivel
|
|
CHIP-R Resin folding and stacking chairs / CHAIR TO CHAIR program
FROM CHAIR TO CHAIR
CHIP R FOLDING CHAIRS AND THE NEW FRONTEER OF RECYCLING
NEW
New like in NEW CHAIRS by DRAKE, and going toward a GREEN direction. Our new line of folding chairs is made of plastic recycled materials for the environmentally friendly market. Colors available are light brown and gray.
WHAT
The biggest challenge, was to be able to UP-QUALIFY the plastic recycled compound, mixing it with secret ingredients in order to provide chairs that respect our tough requirements in terms of strength and quality.
WHY
Environmental sensitivity, without compromising the demanding performances requested from our regular chairs... the best on the market of course.
MORE
The new recycled chairs have the same longevity of our traditional chairs. The main difference with chairs made with virgin material is color: they are not made in white. Our new recycled chairs are available in a range of soft colors. Due to the fact that we cannot contrast colors from previous applications, the colors in recycled chairs are rich with shades resembling the natural variety that can be found in wood materials. They are kind of super-cool actually!!!
DO NOT BE FOOLED by the word "recycled", this chair formulation guarantees a military grade product, as though as it can be!!!
Contact us to purchase a sample for evaluation...
link
TECH DATA
|
|
SOLID...As a ROCK
The LOAD rests on the two bars supporting the seat, NOT on the screws as on similar chairs.
All Drake folding chairs must comply with our 500lb. of static vertical weight standard. FEDERAL SPECIFICATION AA-C-291F
|
|
MATERIAL
CHIP-R chairs are manufactured with our own dual density post industrial recycled RESIN plus GAS system. Resin is FIBERGLASS ADDED for maximum resistance.
The result is another incredible, exceptionally strong, and good looking chair, by Drake.
|
|
DIMENSIONS
Chair dimensions when folded:
17 3/8 x 35 x 2 1/3 [inches]
45 x 89 x 6 [cm]
net weight:
11 pounds including padded seat.
PATENTED STACKING SYSTEM WITH INTERLOCKING
STACK OF 25 CHAIRS: h=58.5
STACK OF 30 CHAIRS: h=70
STACK OF 50 CHAIRS: h=117
|
|
SHIPPING
Chairs are shipped in stacks of 32,
18"x36"x83" at 350 pounds
CLASS 92.5
|
|
SAMPLES
Samples come in a box of 1ea.:
18"x42"x3" at 11 pounds
|
ACCESSORIES
|
|
DR chair pallet & for FOLDING chairs
One chair pallet fits up to 30 chairs. Secure the chairs to the pallet with straps before moving, making sure the strap works with the interlocking system of the chair.
material: thermoformed HDPE 0.220 thick sheet
capacity: 330 lb. distributed load
internal: 17.75 x 35.5
external: 18.25 x 36
straps: external
pallet feet: yes (built in)
long side clearance: 28 (pallet jacks)
short side clearance: chair trucks
casters: none
to be used with CHAIR TRUCKS or PALLET JACKS
|
|
Chair truck
Strong sturdy, a major help in handling chairs. Every task involving moving chairs will be easier.
Please secure the chairs to the chair base or pallets before operating it.
4 pneumatic wheels/10 closed cell foam tires, ball bearing hubs
powder coated steel frame
expanded metal backguard & 54 aluminum fenders to protect load from rubbing on tires
34 long forks, 7/8 diameter, 14 3/4 apart, designed for heavy duty hauling
MAX LOAD: 750 lbs.
weight: 97 lbs.
Shipped via truck only, some assembly required.
|
|
Chair hand truck (single axle)
Our single axle chair handtruck is a good and cheaper alternative to a chair truck. Designed to lift heavy loads with minimum effort and transportation over rough pavement, down curbs, across lawns and up/down ramps. Folding forks allow shipment via UPS.
Specifications:
2 pneumatic wheels/10
Height: 65 Length: 37 (with forks open)
Width: 28 with pneumatic wheels
Weight: 40 lbs.
Shipped via UPS or via truck, some assembly required.
Box dimensions:
19 3/8 x 11 3/4 x 64 1/2
weight: 50 lbs.
|
|
Extra chair pads
The 1/4" flexible padded resin seat is more comfortable than the wood seat. It snaps in and snaps out in a flash without any tools or screws:
- do not warp with humidity
- more comfortable because of the flexibility of the material they are made of.
Available in white or black.
|
|
STRUCTURE TB133 Fire rated resin folding and stacking chairs
STRUCTURE TB133 is a SPECIAL VERSION of our popular Structure chair made to comply with PUBLIC SEATING FIRE requirements (TB133).
More and more Administrations are requesting public seating to comply with standard fire codes, and we came out with a plastic chair that is easy to use, is tough and now also TB133 compliant!!!
Just like the original model, Structure TB133 chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple. They are strong, durable, weatherproof, don't need painting and require very little maintenance.
***STRUCTURE TB133 folding and stacking chair.
***10 lbs. including padded seat.
***Solid material (no hollow core).
***Available in White color
***custom color available upon request
STRUCTURE TB133 are made to order, please allow 6 weeks delivery time and make sure that you specify TB133 when placing the order for Structure TB133 compliant.
***MADE IN THE USA
BUY A SAMPLE ON-LINE or click on ask quote. SPECIAL INTERNET PRICE includes UPS cost ANYWHERE in the CONTINENTAL USA. No more than ONE sample per company, please.
link
TECH DATA
|
|
SOLID...As a ROCK
The LOAD rests on the two bars supporting the seat, NOT on the screws as on similar chairs.
All Drake folding chairs must comply with our 500lb. of static vertical weight standard. FEDERAL SPECIFICATION AA-C-291F
|
|
MATERIAL
The material used at Drake is a composite multi-layer techno-polymer which allows the manufacturing of the strongest (tested at 500lb.) and lightest (10lbs, only) special event resin chairs on the market.
STRUCTURE chairs are manufactured with a TWO COMPONENT RESIN (CO-INJECTION) system, the highest standards in plastic manufacturing.
The result is an outer, smooth all weather resistant aesthetic skin, and an inner expanded closed cell modified resin with high mechanical resistance that behaves like a bone and gives exceptional strength to the chair.
For STRUCTURE TB133 the materials of the chair itself have been upgraded to:
Outer Material: PP Fire rated
PAD/plastic seat board: PP Fire rated
PAD/Seat Foam: PU Fire Resist. Class 1/M
PAD/Vinyl Cover: 100% PVFP-PVC Fire Resist. Class M2
|
|
FLAMMABILITY TESTING
*** STRUCTURE TB133/FLAMMABILITY OF PUBLIC SEATING TESTING
An open calorimeter was used for this project. Under this test method, seating furniture is exposed to an open flame ignition source. Test results include rate of heat release determinations:
Peak Heat Release Rate, (kW): 20 (OK)
Total Heat Released @ 10 Min. (MJ): 1.3 (OK)
With a Peak Heat Release Rate Time of 1.5 min.
STANDARD CRITERIA FOR ACCEPTANCE:
Seating Furniture MEET the requirements of TB 133 if any of the following criteria are met:
1) A heat release rate of less than 80 kW during the test.
2) A total heat release in the first 10 minutes of the test must LESS THAN 25 MJ
Well... we did pretty well, didnt we?
|
|
DIMENSIONS
Chair dimensions when folded:
17 3/8 x 35 x 2 1/3 [inches]
45 x 89 x 6 [cm]
net weight:
10 pounds including padded seat.
PATENTED STACKING SYSTEM WITH INTERLOCKING
STACK OF 25 CHAIRS: h=58.5
STACK OF 30 CHAIRS: h=70
STACK OF 50 CHAIRS: h=117
|
|
SHIPPING
Our Structure chairs, come in a box of 5.
Box Weight: [52 lb.] [23.5kg]
Box Dim.:
18 x 36 x 13 [inches]
46 x 91.5 x 33 [cm]
CLASS 85
|
|
SAMPLES
Samples come in a box of 1ea.:
18"x42"x3" at 11 pounds
|
ACCESSORIES
|
|
Extra chair pads
The 1/4" flexible padded resin seat is more comfortable than the wood seat. It snaps in and snaps out in a flash without any tools or screws:
- do not warp with humidity
- more comfortable because of the flexibility of the material they are made of.
*** TB133 RATED
PAD/plastic seat board: PP Fire rated
PAD/Seat Foam: PU Fire Resist. Class 1/M
PAD/Vinyl Cover: 100% PVPP-PVC Fire Resist. Class M2
|
|
CHATEAU: folding and stacking chairs
CHATEAU resin folding and stacking chair
Chateau folding and stacking chairs by Drake, with their high decorative back towering the tables and their classical rich lines, will stand out and look fabulous whatever the setting. Whether used with additional decorations or simply bare, the Chateau will bring high class event sophistication with the ease of handling of a folding chair.
The technology for the Chateau is the same as our traditional Structure folding chair, Co-injection technology with an aesthetic outer skin as well as a solid foam core.
Features:
Super lightweight.
Strong and secure.
Patented stacking and interlocking system.
Ultra bright white color. (Other colors include black, redwood, silver and gold.)
These chairs will better dominate the table set up due to the 41.5 long design.
Chateau chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple. They are strong, durable, weatherproof, UV protected, don't need painting and require very little maintenance.
MADE IN THE USA
BUY A SAMPLE ON-LINE or click on ask quote.
link
TECH DATA
|
|
SOLID...As a ROCK
Like all Drake folding chairs, the LOAD rests on the two bars supporting the seat, NOT on the screws as on similar chairs.
All Drake folding chairs must comply to our 500lb. of static vertical weight standard testing. FEDERAL SPECIFICATION AA-C-291F
|
|
MATERIAL
The material used at Drake is a composite multi-layer techno-polymer which allows the manufacturing of the strongest (tested at 500lb.) and lightest (10lbs, only) special event resin chairs on the market.
CHATEAU chairs are manufactured with a TWO COMPONENT RESIN (CO-INJECTION) system - the highest standard in plastic manufacturing. The result is an outer, smooth all weather resistant aesthetic skin, and an inner expanded closed cell modified resin with high mechanical resistance that behaves like a bone and gives exceptional strength to the chair.
|
|
DIMENSIONS
Our chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple.
Flat Chair dimensions:
17 3/8" x 41.5" x 2 1/3"
Net weight: 10.5 pounds including padded seat.
STACK OF 25 CHAIRS: h=58.5
STACK OF 30 CHAIRS: h=70
STACK OF 50 CHAIRS: h=117
|
|
MAINTENANCE, REPAIR & WARNINGS
Buying our products means never having to paint a chair again. Because the colors of our products run all the way through them they will never need painting. The only ordinary maintenance required is cleaning.
Inspect and check the integrity of each chair every time before deploying it, making sure all bolts and parts are firmly tightened.
If any parts are missing, damaged, or worn, stop using the chair.
This chair is designed for seating one person at a time and for sitting only.
Do not stand on the chair.
Do not use it as a step ladder.
In the event of damages from extremely rough handling or improper use, do not attempt to glue broken parts back together.
**Call us at 732 254 1530 for spare parts**
We'll be there to assist you in the best way we can.
|
|
SHIPPING
Chateau chairs come in a box of 5 ea.
17 3" x 41.5" x 12.5" at 55 lbs.
Shipping CLASS 85
Samples come in a box of 1ea.:
18"x42"x3" at 11 pounds
|
ACCESSORIES
|
|
Chair link and spacer: you need space!!!
Sometimes linking chairs together is mandatory. Whenever you link chairs without spacing, you oblige guests to
squeeze in a 17/18 chair. They need space!!!
With our link & spacer device, you can give 3 more comfort to your
customers and guests so that the feeling is to sit on a wider space.
FEATURES
Snap on, NO TOOLS required
Leaves 3 between linked chairs
Stacks for storage
Engraved 3 3/4 x 1 1/2 Drake Logo could be replaced by your logo for a one time set up fee
Placeholder can be used with business card, advertising card, reserved seating card, row and seat number card, event card. Customize the event/seating using Averyฎ Clean Edge Business cards 2x3 1/2
|
|
Pallets & stack covers for high back chairs
DE CHAIR PALLET FOR HIGH BACK FOLDING CHAIRS (extra long)
material: thermoformed HDPE 0.220 thick
sheet capacity: 330 lb. distributed load
internal: 18 x 43.5
external: 18.5 x 44
straps: 2
pallet feet: none
casters: none
to be used with CHAIR TRUCKS
ECONOMY STACK COVER FOR HIGH BACK FOLDING CHAIRS (extra long)
Non-woven polyester material. Breathable fabric. 52 lateral slit with Velcro eases up positioning of the cover on the stack and a Velcro buckle for extra security. Bottom edge is hemmed for durability.
Dim. 18 x 42 x 58 high
|
|
Chair truck
Strong sturdy, a major help in handling chairs. Every task involving moving chairs will be easier.
Please secure the chairs to the chair base or pallets before operating it.
4 pneumatic wheels/10 closed cell foam tires, ball bearing hubs
powder coated steel frame
expanded metal backguard & 54 aluminum fenders to protect load from rubbing on tires
34 long forks, 7/8 diameter, 14 3/4 apart, designed for heavy duty hauling
MAX LOAD: 750 lbs.
weight: 97 lbs.
Shipped via truck only, some assembly required.
|
|
Chair hand truck (single axle)
Our single axle chair handtruck is a good and cheaper alternative to a chair truck. Designed to lift heavy loads with minimum effort and transportation over rough pavement, down curbs, across lawns and up/down ramps. Folding forks allow shipment via UPS.
Specifications:
2 pneumatic wheels/10
Height: 65 Length: 37 (with forks open)
Width: 28 with pneumatic wheels
Weight: 40 lbs.
Shipped via UPS or via truck, some assembly required.
Box dimensions:
19 3/8 x 11 3/4 x 64 1/2
weight: 50 lbs.
|
|
Extra chair pads
The 1/4" flexible padded resin seat is more comfortable than the wood seat. It snaps in and snaps out in a flash without any tools or screws:
- do not warp with humidity
- more comfortable because of the flexibility of the material they are made of.
Available in white or black.
|
|
LOUIS: folding and stacking chairs
LOUIS resin folding and stacking chair
While Chateau chairs are drawn with classical lines, Louis folding and stacking chairs by Drake, shines with simple contemporary design. With their high decorative back towering the tables and their modern rich lines, will stand out and look fabulous whatever the setting. Whether used with additional decorations or simply bare, the Louis will bring high class event sophistication with the ease of handling of a folding chair.
The technology for the Louis is the same as our traditional Structure folding chair, Co-injection technology with an aesthetic outer skin as well as a solid foam core.
Features:
Super lightweight.
Strong and secure.
Patented stacking and interlocking system.
Ultra bright white color. (Other colors include black, redwood, silver and gold.)
These chairs will better dominate the table set up due to the 41.5 long design.
Louis chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple. They are strong, durable, weatherproof, UV protected, don't need painting and require very little maintenance.
MADE IN THE USA
BUY A SAMPLE ON-LINE or click on ask quote.
link
TECH DATA
|
|
SOLID...As a ROCK
Like all Drake folding chairs, the LOAD rests on the two bars supporting the seat, NOT on the screws as on similar chairs.
All Drake folding chairs must comply to our 500lb. of static vertical weight standard testing. FEDERAL SPECIFICATION AA-C-291F
|
|
MATERIAL
The material used at Drake is a composite multi-layer techno-polymer which allows the manufacturing of the strongest (tested at 500lb.) and lightest (10lbs, only) special event resin chairs on the market.
LOUIS chairs are manufactured with a TWO COMPONENT RESIN (CO-INJECTION) system - the highest standard in plastic manufacturing. The result is an outer, smooth all weather resistant aesthetic skin, and an inner expanded closed cell modified resin with high mechanical resistance that behaves like a bone and gives exceptional strength to the chair.
|
|
DIMENSIONS
Our chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple.
Flat Chair dimensions:
17 3/8" x 41.5" x 2 1/3"
Net weight: 10.5 pounds including padded seat.
STACK OF 25 CHAIRS: h=58.5
STACK OF 30 CHAIRS: h=70
STACK OF 50 CHAIRS: h=117
|
|
MAINTENANCE, REPAIR & WARNINGS
Buying our products means never having to paint a chair again. Because the colors of our products run all the way through them they will never need painting. The only ordinary maintenance required is cleaning.
Inspect and check the integrity of each chair every time before deploying it, making sure all bolts and parts are firmly tightened.
If any parts are missing, damaged, or worn, stop using the chair.
This chair is designed for seating one person at a time and for sitting only.
Do not stand on the chair.
Do not use it as a step ladder.
In the event of damages from extremely rough handling or improper use, do not attempt to glue broken parts back together.
**Call us at 732 254 1530 for spare parts**
We'll be there to assist you in the best way we can.
|
|
SHIPPING
Louis chairs come in a box of 5 ea.
17 3" x 41.5" x 12.5" at 55 lbs.
Shipping CLASS 85
Samples come in a box of 1ea.:
18"x42"x3" at 11 pounds
|
ACCESSORIES
|
|
Chair link and spacer: you need space!!!
Sometimes linking chairs together is mandatory. Whenever you link chairs without spacing, you oblige guests to
squeeze in a 17/18 chair. They need space!!!
With our link & spacer device, you can give 3 more comfort to your
customers and guests so that the feeling is to sit on a wider space.
FEATURES
Snap on, NO TOOLS required
Leaves 3 between linked chairs
Stacks for storage
Engraved 3 3/4 x 1 1/2 Drake Logo could be replaced by your logo for a one time set up fee
Placeholder can be used with business card, advertising card, reserved seating card, row and seat number card, event card. Customize the event/seating using Averyฎ Clean Edge Business cards 2x3 1/2
|
|
Pallets & stack covers for high back chairs
DE CHAIR PALLET FOR HIGH BACK FOLDING CHAIRS (extra long)
material: thermoformed HDPE 0.220 thick
sheet capacity: 330 lb. distributed load
internal: 18 x 43.5
external: 18.5 x 44
straps: 2
pallet feet: none
casters: none
to be used with CHAIR TRUCKS
ECONOMY STACK COVER FOR HIGH BACK FOLDING CHAIRS (extra long)
Non-woven polyester material. Breathable fabric. 52 lateral slit with Velcro eases up positioning of the cover on the stack and a Velcro buckle for extra security. Bottom edge is hemmed for durability.
Dim. 18 x 42 x 58 high
|
|
Chair truck
Strong sturdy, a major help in handling chairs. Every task involving moving chairs will be easier.
Please secure the chairs to the chair base or pallets before operating it.
4 pneumatic wheels/10 closed cell foam tires, ball bearing hubs
powder coated steel frame
expanded metal backguard & 54 aluminum fenders to protect load from rubbing on tires
34 long forks, 7/8 diameter, 14 3/4 apart, designed for heavy duty hauling
MAX LOAD: 750 lbs.
weight: 97 lbs.
Shipped via truck only, some assembly required.
|
|
Chair hand truck (single axle)
Our single axle chair handtruck is a good and cheaper alternative to a chair truck. Designed to lift heavy loads with minimum effort and transportation over rough pavement, down curbs, across lawns and up/down ramps. Folding forks allow shipment via UPS.
Specifications:
2 pneumatic wheels/10
Height: 65 Length: 37 (with forks open)
Width: 28 with pneumatic wheels
Weight: 40 lbs.
Shipped via UPS or via truck, some assembly required.
Box dimensions:
19 3/8 x 11 3/4 x 64 1/2
weight: 50 lbs.
|
|
Extra chair pads
The 1/4" flexible padded resin seat is more comfortable than the wood seat. It snaps in and snaps out in a flash without any tools or screws:
- do not warp with humidity
- more comfortable because of the flexibility of the material they are made of.
Available in white or black.
|
|
NEW FAN: resin folding and stacking chairs
FAN resin folding and stacking chair.
10.5 lbs. including padded seat.
Solid material (no hollow core)
Available in White or Black color
and Silver color frame with black pad.
Made in the USA
No more hanging on racks as happens with similar chairs!!! Our chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple. They are strong, durable, weatherproof, UV protected, don't need painting and require very little maintenance.
Fan are well known folding and stacking chairs by Drake. The new Fan chairs by Drake, are now manufactured with the back completely integrated into the chair frame. The decision to move toward this solution, was made to both increase the comfort of the back, and improve the aesthetics of the chair.
In the new chair, the materials of the back and the frame are now consistent in resistance and color. The back is very flexible to meet higher comfort standards and to make the entire chair more impact resistant at the same time. The new backs have been furthermore designed to have a smooth surface that's not textured, which makes it much easier to clean. Texture is known to be used in plastic to hide defects. As we do not need to hide anything... we decided to ease up the life of the people that work with our products lifting the Fan chair to new, higher standards!!!
BUY A SAMPLE ON-LINE or click on ask quote.
link
TECH DATA
|
|
SOLID...As a ROCK
Like all Drake folding chairs, the LOAD rests on the two bars supporting the seat, NOT on the screws as on similar chairs.
All Drake folding chairs must comply to our 500lb. of static vertical weight standard testing. FEDERAL SPECIFICATION AA-C-291F
|
|
MATERIAL
The material used at Drake is a composite multi-layer techno-polymer which allows the manufacturing of the strongest (tested at 500lb.) and lightest (10lbs, only) special event resin chairs on the market.
FAN chairs are manufactured with a TWO COMPONENT RESIN (CO-INJECTION) system - the highest standard in plastic manufacturing. The result is an outer, smooth all weather resistant aesthetic skin, and an inner expanded closed cell modified resin with high mechanical resistance that behaves like a bone and gives exceptional strength to the chair.
|
|
DIMENSIONS
No more hanging on racks as happens with similar chairs!!! Our chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple. They are strong, durable, weatherproof, UV protected, don't need painting and require very little maintenance. Our chairs can be used with chair washing machines.
Flat Chair dimensions:
17 3/8" x 41.5" x 2 1/3"
Net weight: 10.5 pounds including padded seat.
STACK OF 25 CHAIRS: h=58.5
STACK OF 30 CHAIRS: h=70
STACK OF 50 CHAIRS: h=117
|
|
SHIPPING
Fan chairs come in a box of 5 ea.
17 3" x 41.5" x 12.5" at 55 lbs.
Shipping CLASS 85
Samples come in a box of 1ea.:
18"x42"x3" at 11 pounds
|
|
MAINTENANCE, REPAIR & WARNINGS
Buying our products means never having to paint a chair again. Because the colors of our products run all the way through them they will never need painting. The only ordinary maintenance required is cleaning.
Inspect and check the integrity of each chair every time before deploying it, making sure all bolts and parts are firmly tightened.
If any parts are missing, damaged, or worn, stop using the chair.
This chair is designed for seating one person at a time and for sitting only.
Do not stand on the chair.
Do not use it as a step ladder.
In the event of damages from extremely rough handling or improper use, do not attempt to glue broken parts back together.
**Call us at 732 254 1530 for spare parts**
We'll be there to assist you in the best way we can.
|
ACCESSORIES
|
|
Chair link and spacer: you need space!!!
Sometimes linking chairs together is mandatory. Whenever you link chairs without spacing, you oblige guests to
squeeze in a 17/18 chair. They need space!!!
With our link & spacer device, you can give 3 more comfort to your
customers and guests so that the feeling is to sit on a wider space.
FEATURES
Snap on, NO TOOLS required
Leaves 3 between linked chairs
Stacks for storage
Engraved 3 3/4 x 1 1/2 Drake Logo could be replaced by your logo for a one time set up fee
Placeholder can be used with business card, advertising card, reserved seating card, row and seat number card, event card. Customize the event/seating using Averyฎ Clean Edge Business cards 2x3 1/2
|
|
Pallets & stack covers for high back chairs
DE CHAIR PALLET FOR HIGH BACK FOLDING CHAIRS (extra long)
material: thermoformed HDPE 0.220 thick
sheet capacity: 330 lb. distributed load
internal: 18 x 43.5
external: 18.5 x 44
straps: 2
pallet feet: none
casters: none
to be used with CHAIR TRUCKS
ECONOMY STACK COVER FOR HIGH BACK FOLDING CHAIRS (extra long)
Non-woven polyester material. Breathable fabric. 52 lateral slit with Velcro eases up positioning of the cover on the stack and a Velcro buckle for extra security. Bottom edge is hemmed for durability.
Dim. 18 x 42 x 58 high
|
|
Chair truck
Strong sturdy, a major help in handling chairs. Every task involving moving chairs will be easier.
Please secure the chairs to the chair base or pallets before operating it.
4 pneumatic wheels/10 closed cell foam tires, ball bearing hubs
powder coated steel frame
expanded metal backguard & 54 aluminum fenders to protect load from rubbing on tires
34 long forks, 7/8 diameter, 14 3/4 apart, designed for heavy duty hauling
MAX LOAD: 750 lbs.
weight: 97 lbs.
Shipped via truck only, some assembly required.
|
|
Chair hand truck (single axle)
Our single axle chair handtruck is a good and cheaper alternative to a chair truck. Designed to lift heavy loads with minimum effort and transportation over rough pavement, down curbs, across lawns and up/down ramps. Folding forks allow shipment via UPS.
Specifications:
2 pneumatic wheels/10
Height: 65 Length: 37 (with forks open)
Width: 28 with pneumatic wheels
Weight: 40 lbs.
Shipped via UPS or via truck, some assembly required.
Box dimensions:
19 3/8 x 11 3/4 x 64 1/2
weight: 50 lbs.
|
|
Extra chair pads
The 1/4" flexible padded resin seat is more comfortable than the wood seat. It snaps in and snaps out in a flash without any tools or screws:
- do not warp with humidity
- more comfortable because of the flexibility of the material they are made of.
Available in white or black.
|
|
FURNITURE | CHIAVARI
Chiavari Chairs and accessories.
NEW RESIN CHIAVARI stacking chair.
The aesthetic respects the old traditional look but...
deep inside Drake Chiavari stacking chairs have been re-engineered ground-up.
The NEW MIX of techno-polymers they are made of, makes them exceptionally strong, sturdy and a far better alternative to a plastic chair with a metallic insert, at a fraction of the weight.
NEW DRAKE CHIAVARI STACKING CHAIRS:
EXCEPTIONALLY STRONG & STURDY
LIGHTWEIGHT
EASY HANDLING AND LOW COST MAINTENANCE
(weatherproof, UV protected, don't need painting).
SAFER INTERLOCKING STACKING
OPTIONAL CHAIR SHOES (for outdoor use on lawns and sand)
Available in White, Black, Gold, Silver.
link
|
NEW CHIAVARI: fiberglass resin stacking ballroom chairs
NEW RESIN CHIAVARI stacking chair.
The aesthetic respects the old traditional look but...
deep inside Drake Chiavari stacking chairs have been re-engineered ground-up.
The NEW MIX of techno-polymers they are made of, makes them exceptionally strong, sturdy and a far better alternative to a plastic chair with a metallic insert, at a fraction of the weight.
NEW DRAKE CHIAVARI STACKING CHAIRS:
EXCEPTIONALLY STRONG & STURDY
LIGHTWEIGHT
EASY HANDLING AND LOW COST MAINTENANCE
(weatherproof, UV protected, don't need painting).
SAFER STACKING, INTERLOCKING WITH A CLICK!!!
TAILORED CUSHIONS AND VINYL PADS
OPTIONAL CHAIR SHOES (for outdoor use on lawns and sand)
Available in White, Black, Light Brown, Gold, Silver.
***SHIPPED KD: Easy assembly, no glue required.
BUY A SAMPLE ON-LINE or click on ask quote. No more than a sample per company, please. SAMPLES ARE SHIPPED ASSEMBLED UNLESS SPECIFIED OTHERWISE.
CURIOSITY:
if you would like to know more about Chiavari chairs and go back in time, follow the link below:
History of the Chiavari Chairs
link
TECH DATA
|
|
MATERIAL
The material used at Drake is a composite multi-layer techno-polymer which allows the manufacturing of a very strong and extra light weight Chiavari resin chair.
CHIAVARI chairs are manufactured with a TWO COMPONENT RESIN (CO-INJECTION) system - the highest standard in plastic manufacturing. The result is an outer, smooth all weather resistant aesthetic skin, and an inner expanded closed cell modified resin FIBERGLASS ADDED, with high mechanical resistance that behaves like a bone and gives exceptional strength to the chair.
|
|
COMFORTABLE
The forgiving nature of the back of our Chiavari chair gives it a comfort level unparalleled by wood.
|
|
DIMENSIONS and WEIGHTS
PATENTED SAFER CHAIR INTERLOCKING STACKING
Our Chiavari chairs stack and safely interlock. 40 chairs fit a regular pallet for storage thus reducing warehousing costs.
Chair seat dimensions:
16 x 16 x 18 seat h [inches]
41 x 41 x 45 seat h [cm]
net weight: 10 pounds / 4.5kg
Stack Dimensions:
7 chairs: 17x26x88h[inches]
43x68x223[cm]
8 chairs: 17x27x96h [inches]
43x69x245 [cm]
10 chairs: 17x28x113h [inches]
43x70x288 [cm]
|
|
ASSEMBLY INSTRUCTIONS
The assembly is EASY, screws only, no glue required. Instructions are conveniently located on the carton of every box.
*** For orders of 100 chairs or more, you will receive a FREE cordless driver to ease up assembly.
Download instructions in PDF
Chiavari FG Models / Assembly Instructions
|
|
CHIAVARI CHAIR HANDLING
The best way is stack them, cover them, and tighten. A chair pallet is always handy (the protection of the first chair of the stack is less critical than in folding stacking chairs operations, but VERY useful).
With our chairs, we use plastic custom made pallets, or regular wood pallets with pallet shoes that secure the first chair of the stack to the pallet itself. A chair pallet eases up stack handling with both hand-trucks or pallet-jacks. Some of our customers use PE film or bags to wrap the chair for storage or transport.
|
|
CHIAVARI CHAIRS WAREHOUSING
The DRAKE "pallet shoes" for Chiavari chairs, can be screwed into a wood pallet and secure the first chair of the stack to the pallet. A 48"x20" wood pallets, fits 2 stacks of chairs back to back (5+5 chairs or 6+6 chairs). A similar pallet can be moved easily with a hand-truck as well as with a pallet-jack.
A regular 48"x42" pallet equipped with pallet shoes, fits 4 stacks of chairs back to back (5+5+5+5=20 chairs or 6+6+6+6=24 chairs). Chairs have to be strapped and secured for additional safety. Higher stacks, of 7, 8, 9 or 10 chairs can be used, depending on the goal: maximize warehouse space (static skids) or ease of handling.
***WARNING!!!!***
DRAKE CHIAVARI Chairs stack so nicely that we have to remind you:
higher stacks are more unstable than short ones. For static stacks, the number of chairs in a stack is not an issue, but if you are moving your stacks, do not exceed in the number of chairs stacked: SAFETY COMES FIRST, ALWAYS!!!!
Do not attempt to make similar high stacks with woods.
NOTICE: DO NOT USE COTTON COVERS WITH RESIN CHAIRS, as the static electricity produced by the two materials combined, attracts dust and any kind of dirt.
|
|
SHIPPING
Our Chiavari chairs are shipped KD (knocked down) 2 chairs per box. Assembly is EASY, screws only, no glue required. Instructions are conveniently located on the box.
Box Weight: [21 lb.] [9kg]
Box Dim.:
17x37x6 [inches]
93.5x42x15.5 [cm]
|
|
MAINTENANCE AND REPAIR
Buying our products means never having to paint a chair again. Because the colors of our products run all the way through them they will never need painting. The only ordinary maintenance required is a wipe down with a mild liquid detergent and water.
Besides regular cleaning, check the chair structural integrity and screws every time before use.
In the event of damage due to extremely rough handling, do not attempt to glue broken parts back together. Call us at 732 254 1530 for spare parts. We'll be there to assist you in the best way we can.
|
ACCESSORIES
|
|
1 1/2" Rigid Chiavari Pad
Taylored resin rigid base, with soft vinyl leather-textured cover and a 1 urethane foam. The pad is positioned onto the chair with 4 velcro bullets to make it easy to remove, interchange or store separately.
It features:
vinyl cover
urethane foam
PP rigid base
Outdoor/Indoor use.
Standard colors: white and black.
Indoor as well as outdoor use.
CUSTOM UPHOLSTERY PROGRAM
If it can be done ... well do it ... your personal touch !! Its possible that you might like to have a personal color or pattern and/or other fabric to match the Company ID or other pieces of furniture. When you are ready, just give us a call and well give you the proper dimensions needed for the cuts. No extra charge ... just send us the pieces of fabric or vinyl in the quantity you need and well do the rest. We supply the best looking chiavari pads and cushions money can buy. However if you can compromise on perfection, please ask about our entry level cushions.
|
|
2 Custom Fit Chiavari Cushion
Shaped like the Chiavari seat for the perfect look, luxurious double piping. Washable polyester cover with a zipper filled with 1" urethane foam & fiber batting.
Attaches to the chair back legs with velcro straps.
It features:
washable polyester cover
fiber batting
urethane foam
Standard colors: white, ivory (natural) and black. Cushions usable on both sides.
|
|
Pad & Cushion Bag for Storage and Transportation
Makes transportation easy while protecting and organizing for storage.
Sewed-in rigid bottom, wide top opening for easy access and counting, reinforced handles.
Suggested capacity 15 to 20 pads or cushions depending upon size.
Standard color: gray
dimensions: 35 x 17 x 17 high
|
|
Chiavari shoes: no more sinking
Break the rules and move seating to locations that have always been traditionally difficult for chairs.
Our chair shoes increase support for the chair legs on difficult ground, greatly reducing the sinking of the legs.
Whether on the beach, on a green at your favorite golf club, or simply on a backyard lawn, our support system lets you bring our classy Chiavari chairs and your unforgettable events to a whole new level outdoors.
Our Chiavari shoes are easy to deploy. Snap them onto the chair legs, no tools required, snap them off when finished.
Our Chiavari shoes do not interfere with the chairs ability to stack. Chairs can be collected, stacked, stored, moved and re-deployed without removing the shoes.
Small holes in the supporting plate area, allow the lawn to breath, greatly minimizing any damage to it even with extended use of the chair on the grass.
One set includes 4 shoes for one chair.
|
|
Chiavari shoes: secure chairs to a pallet
Our Chiavari shoes can be used to secure our Chiavari chairs to a wood pallet, for easier and secure transportation.
When one set of Chiavari shoes is screwed into a wood pallet, it secures the first chair of the stack to the pallet, preventing the chairs from sliding, keeping them firmly in place on the pallet.
Use of additional strapping (not included) is suggested before moving a stack of chairs.
One set includes 4 shoes for one chair.
|
|
Chair pallets for CHIAVARI chairs
One Chiavari chair pallet fits 2 stacks of 5 chairs. Secure the chairs to the pallet with straps before moving.
material: thermoformed HDPE 0.220 thick sheet
capacity: 330 lb. distributed load
internal: 17.75 x 35.5
external: 18.25 x 36
straps: external
pallet feet: yes (built in)
long side clearance: 28 (pallet jacks)
short side clearance: chair trucks
casters: none
to be used with CHAIR TRUCKS or PALLET JACKS
|
|
Chair truck
Strong sturdy, a major help in handling chairs. Every task involving moving chairs will be easier.
Please secure the chairs to the chair base or pallets before operating it.
4 pneumatic wheels/10 closed cell foam tires, ball bearing hubs
powder coated steel frame
expanded metal backguard & 54 aluminum fenders to protect load from rubbing on tires
34 long forks, 7/8 diameter, 14 3/4 apart, designed for heavy duty hauling
MAX LOAD: 750 lbs.
weight: 97 lbs.
Shipped via truck only, some assembly required.
|
|
Chair hand truck (single axle)
Our single axle chair handtruck is a good and cheaper alternative to a chair truck. Designed to lift heavy loads with minimum effort and transportation over rough pavement, down curbs, across lawns and up/down ramps. Folding forks allow shipment via UPS.
Specifications:
2 pneumatic wheels/10
Height: 65 Length: 37 (with forks open)
Width: 28 with pneumatic wheels
Weight: 40 lbs.
Shipped via UPS or via truck, some assembly required.
Box dimensions:
19 3/8 x 11 3/4 x 64 1/2
weight: 50 lbs.
|
|
ELLE Collection
Elle STACKING CHAIRS & BAR STOOLS
Elle seamlessly integrates classic geometrical styling with simple elegance to create a look that is rigorous , esential and modern. The Elle line makes no compromise between style and function, simple beauty and strength.
Both the Elle chair and the Elle stool are stackable and there is no folding, disassembling or tricks of any kind to prepare them for storage simply stack and forget. Stacking is extremely compact and designed with a special soft mount stack system that actually protects the stools as they nest into one another. The squared geometric lines give the stools their neat look and strength, while they may look like a delicate piece of art they have been designed and rigorously tested to take the abuses involved with heavy commercial use.
BUY A SAMPLE ON-LINE or click on ask quote.
link
TECH DATA
|
|
COLORS: seat colors available
4 color seats available to chose from:
W [White]
G [Light Gray]
R [Red]
B [Black]
|
|
DIMENSIONS: Elle chair
ELLE STACKING Low back chair
Composite multi-layer techno-polymer seat
Chrome metal legs with rubber caps
Weight: 14 lb.
Seat Dimensions: 14x15x17h
Some assembly Required.
Download instructions in PDF:
Elle / Assembly Instructions
|
|
DIMENSIONS: Elle stool
ELLE STACKING STOOL
Composite multi-layer techno-polymer seat
Chrome metal legs with rubber caps
Weight: 17 lb.
Seat Dimensions: 14x15x30h (resin seat)
Seat Dimensions: 14x15x29.5h (leather seat)
Some assembly Required.
Download instructions in PDF:
Elle / Assembly Instructions
|
ACCESSORIES
|
|
ELLE Extra Seats Multiple Colors
Use the same frame and keep multiple color seats. Easy to interchange.
|
|
TRE3 collection
TRE 3
Designed by up and coming architects and designers L. Nichetto & C. Tinti, the Tre 3 seamlessly integrates classic geometrical styling with new age elegance to create a look that seems to defy gravity.
The Tre 3 line sets a new standard for furniture as functional art and its design has no compromise between style and function, beauty and strength.
The Tre 3 chairs and tables are stackable and there is no folding, disassembling or tricks of any kind to prepare them for storage;simply stack and forget. Tre 3 chairs are designed with a special soft mount stack system that actually protects the chairs as they nest into one another.
The minimalist tri support system gives the chair its floating look and strength, while it may look like a delicate piece of art it has been designed and rigorously tested to take the abuses involved with heavy commercial use.
Resistant to scratches and chips and impervious to stains and tears these chairs have all the durability of a metal chair with more style than most upholstered chairs.
BUY A SAMPLE ON-LINE or click on ask quote.
link
TECH DATA
|
|
COLORS: seat colors available
4 color seats available to chose from:
W [White]
G [Light Gray]
L [Lime]
Y [Pastel Yellow]
|
|
DIMENSIONS: Tre3 chair
Tre3 STACKING CHAIR
Composite multi-layer techno-polymer seat
Chrome metal legs with rubber caps
Weight: 15 lb.
Seat dimensions:
17.5" x 15"width x 18.5"high
Some assembly Required.
Download instructions in PDF:
Tre3 Chair / Assembly Instructions
|
|
DIMENSIONS: Tre3 stool
Tre3 STACKING STOOL
Composite multi-layer techno-polymer seat
Chrome metal legs with rubber caps
Weight: 21 lb.
Seat dimensions:
17.5" x 15"width x 29.5"high
Some assembly Required.
Download instructions in PDF:
Tre3 Stool / Assembly Instructions
|
|
ELLETTE Collection
ELLETTE CHAIRS: THE KING IS OUT... SO IS THE THRONE!!! Daring the unthinkable
What happens when a company makes a product that is a piece of art... well it is a pity to limit its use. Thats the idea behind Drakes new chair. A design team was asked to deliver Drakes bathroom thrones into the spotlight of the dining area.
Ellette was born.
R&D Why Not Plastic Inc. design for Drake Corp.
The squared geometric lines of the legs blend harmoniously with the roundness of the seat and back creating not just a chair, but an innovative, radical, modern, comfortable piece of art.
Beautiful
Luxuriant
Colorful
Fashionable
Fun
Art meets function
Enjoy leisure while enhancing your home
link
TECH DATA
|
|
COLORS
LIMITED EDITION
6LLTC-TS-BL translucent blue
6LLTC-TS-GR translucent green
6LLTC-TS-R translucent red
6LLTC-TS-Y translucent yellow
REGULAR COLORS
6LLTC-W white
6LLTC-GR granite
6LLTC-BE beige
6LLTC-R red
6LLTC-BL blue
6LLTC-Y yellow
to see the colors in detail please download our PDF brochure (6MB) from the following link:
Ellette colors
|
|
MATERIALS and DIMENSIONS
Seat is made of a composite multi-layer acrylic. The pad is made of Italian Faux Leather, 1/4 CAL117 foam on a wood board.
Legs are chrome 12mm metal wire with rubber caps.
Weight: 18 lb.
Seat Dimensions:
15 3/4 x 14 2/2 x 18h
|
|
TRE3 TABLES collection
Designed by up and coming architects and designers L. Nichetto & C. Tinti, the Tre 3 seamlessly integrates classic geometrical styling with new age elegance to create a look that seems to defy gravity.
The Tre 3 line sets a new standard for furniture as functional art and its design has no compromise between style and function, beauty and strength.
The Tre 3 tables are stackable and there is no folding, disassembling or tricks of any kind to prepare them for storage;simply stack and forget. A special soft mount stack system protects the tables as they nest into one another.
The minimalist tri support system gives the table its floating look and strength.
BUY A SAMPLE ON-LINE or click on ask quote.
link
TECH DATA
|
|
DIMENSIONS: TRE3 ROUND TABLES
TABLE TOP Composite multi-layer techno-polymer Acrylic (ABS core/SAN skin) is available in 2 different sizes:
24"ุ
28"ุ
Chrome metal support with rubber caps (regular table 30"h/bar table 42"h)
Weights:
table 24"ุ: 20.5 lb.
table 28"ุ: 22.5 lb.
bartable 24"ุ: 21.5 lb.
bartable 28"ุ: 23.5 lb.
Some assembly Required.
Download instructions in PDF:
Tre3 24"ุ round table
Tre3 28"ุ round table
Tre3 24"ุ round bar table
Tre3 28"ุ round bar table
|
|
STACKING
TRE3 Tables stack!!!
The upper frames slides into the opening on the tops, while the lower parts nest beautifully into each other.
|
|
FURNITURE DESIGN
NEW CHAIRS AVAILABLE SOON...
Drake Corp. has stepped forth with a new revolution for the furniture industry. With the advent of the Tre 3 chair Drake has shown a willingness to work with artists, architects and designers in a medium of furniture making that until now has been virtually unexplored. By making contemporary chairs out of an advanced composite multilayer technopolymer Drake can turn even the wildest artists dream into reality. By eliminating the constrains of working in wood, Drake limits its ability to produce chairs to that of the imagination. Even the most dramatic and radical chairs can now be produced quickly and efficiently with even more durability and strength than conventional materials. Drake can turn an artists dream into an actual product in production in months.
link
|
BAGS
At Drake we are commited to come up with specialty bags for the food industry most common problems. Where else you can find PIZZAS' BAGs for TAKE OUT ORDERS or Cake Bags ideal to keep boxes horizontal? Let's not forget about our thermal bag solutions for both frozen food and hot food.
link
|
PIZZAs' Bags
Pizzas bag is a new concept of a carrier bag with a lateral opening.
STRONG: our pizzas bag is made of a durable plastic that will not leak or stress under heat.
USEFUL: it keeps pizza boxes horizontal and lets a free hand conveniently carry drinks, handle car keys, and open doors with ease. It protects the customers car seats from grease collected by the boxes on the top of the oven. Simply ideal for metropolitan areas where walking home is standard.
CLEVER: it is an excellent MARKETING TOOL to advertise your business (check out the link CUSTOM GRAPHIC below) . You will be surprised at how many more customers you will gain just from your logo being visible on the bag.
Pizzas bag is a new item that is a must in every "pizzeria".
Fits: 3 pizza boxes 14in. or 2 pizza boxes 16in. or 1 pizza box of 18in.
link
TECH DATA
|
|
WHAT'S THE USE?
A Pizzas Bag keeps pizza boxes horizontally and lets a free hand conveniently carry drinks, handle car keys, and open doors with ease.
|
|
MATERIAL & DIMENSIONS
Handle: Soft Loop
Material: PE white medium density
Bag Dimensions: 25in.x13.5in. (7in. bottom gusset)
|
|
SHIPPING: Box Dimensions And Weight
Shipping: 500 bags per case
box dimensions: 20"x12.5"x8.5"
weight: approx. 40lbs.
500 bags can be shipped by UPS
5000 bags is a full skid (trucking only)
|
ACCESSORIES
|
|
CUSTOM GRAPHIC
A pizzas' bag is an excellent MARKETING TOOL to advertise your business. You will be surprised at how many more customers you will gain just from your logo being visible on the bag.
Pizzas' Bags can be printed with your graphic, in a 10in.x10in. window area.
Min.Qty: 5000 bags.
The custom printing is included in the price of the bag. A ONE TIME ONLY set up fee is required for the logo plates @ 150$ per color per side of the bag.
This means that if a ONE COLOR custom logo is desired on both FRONT and BACK of the bag, a purchase of 2 plates is required.
For raster artwork/pictures requiring 4 color separation, please submit your logo to have a quotation for the set up printing cost.
Please visit our custom graphic requirements page.
|
|
CAKEs' BAGS
Cake bags are a natural evolution of the pizza bag. They are a carrier bag with a lateral opening to carry pies and cakes. Our Cake bag fits:
up to TWO boxes of 12x12"x4 1/4"
or
ONE box of 14"x14"x4 1/4"
link
TECH DATA
|
|
MATERIAL & DIMENSIONS
Handle: Soft Loop
Material: PE white medium density
STANDARD CAKES BAG DIMENSIONS:
23in.x11.8in. (7in. bottom gusset) + 3.25in. handle.
|
|
SHIPPING: Box Dimensions And Weight
Shipping: 500 bags per case
box dimensions: 20"x12.5"x8.5"
weight: approx. 40lbs.
500 bags can be shipped by UPS
5000 bags is a full skid (trucking only)
|
ACCESSORIES
|
|
CUSTOM GRAPHIC
A cakes' bag is an excellent MARKETING TOOL to advertise your business. You will be surprised at how many more customers you will gain just from your logo being visible on the bag.
Cakes' Bags can be printed with your graphic, in a 10in.x10in. window area.
Min.Qty: 5000 bags.
The custom printing is included in the price of the bag. A ONE TIME ONLY set up fee is required for the logo plates @ 150$ per color per side of the bag.
This means that if a ONE COLOR custom logo is desired on both FRONT and BACK of the bag, a purchase of 2 plates is required.
For raster artwork/pictures requiring 4 color separation, please submit your logo to have a quotation for the set up printing cost.
Please visit our custom graphic requirements page.
|
|
HOT (Thermic) Pizza Bags for carry out
Features:
reusable
strong
highly isothermic
micro-holes to avoid condensation
If you have SPECIAL CUSTOMERS that you care for, give them the ability to keep their pizza hot while driving home with their take-out orders.
Hot Pizza Bags keep the pizza hot and fresh and can be used over and over again. They are strong, highly isothermal, and provided with micro holes to avoid condensation.
....We almost forgot to mention: the Hot Pizza Bags happen to also be very economical. But again... your customer satisfaction is priceless...
Fits 1 pizza box of 16".
link
TECH DATA
|
|
MATERIAL & DIMENSIONS
Hot Pizza bags are made of a three layer material:
outer= 18ต PP coex metallic
medium= PE Foam
inner= 10ตHDPE
Dimensions:
20"x20" + 2.5" closing flap
|
|
SHIPPING: Box Dimensions And Weight
Shipping: 50 bags per case
box dimensions: 23.75"x21.5"x10.5"
weight: approx. 7lbs.
50 bags can be shipped by UPS
900 bags is a full skid 48"x31.5"x63" (trucking only)
|
ACCESSORIES
|
|
CUSTOM GRAPHIC
A hot pizzas' bag is an excellent MARKETING TOOL to advertise your business. You will be surprised at how many more customers you will gain just from your logo being visible on a bag that is going to be used over and over.
Min.Qty: 5000 bags.
The custom printing is included in the price of the bag. A ONE TIME ONLY set up fee is required for the logo plates @ 150$ per color.
Bag custom logo is printed and coated with flexographic machines during manufacturing, so please allow a minimum of 8/10 weeks for delivery of custom print bags.
Due to the presence of Microperforation, simple ONE or TWO COLOR LOGOs are recommended.
|
|
Freezer Bags
We manufacture multilayer thermal bags able to keep the temperature of frozen food for approximately 2 hours at 90ฐF (32ฐC) ambient temperature.
We do not currently market freezer bags directly to end users, but we supply distributors and retailers with medium to large quantities of custom bags.
The size, the type of handle, the sealing of frozen bags, as well as the color and graphic are custom to meet our clients specific needs and applications.
Bag sizes available range from small pharmaceutical bags to large 6 gallons containers for thermo sensitive goods.
Please inquiry with your specific request and we will design the solution that is best for you.
link
|
BATHROOM DECOR
Drake manufactures top of the line items for your bathrooms. Thick, solid, elegant, not just ordinary plastic.
TOILET SEATS
Shining resin toilet seats, elegant, top of the line, SAN skin on a foamed ABS core
by co-injection
SHOWER BASES
Shining resin shower bases with or without inmold labeling
by co-injection
link
|
TOILET SEATS: IL LUNGO 18.5" (US SIZE/ELONGATED BOWLS)
IL LUNGO TOILET SEAT
Top-of-the-line, heavy, solid and shiny seats.
Lenght 18.5 (47 cm) Fits All Manufacturers Elongated Bowls
Measure toilet seat from front of bowl to center of mounting holes
Beautiful
Luxuriant
Colorful to the eye
Fashionable
Fun with Possibilities
Art meets function
Enjoy leisure while enhancing your home
Heavy luxury fixing
Brass/chrome with wide adjustment range.
Environmentally friendly high-tech 100% recyclable product. The seats are produced with a co-injection process that yields startling color & a smooth blending into an acrylic finish.
Washes with soap and water. They are anti-bacterial in nature. Nothing sticks to these seats.
link
TECH DATA
|
|
COLORS AVAILABLE
TRANSLUCENT COLORS
TS-BL translucent blue
TS-GR translucent green
TS-R translucent red
TS-Y translucent yellow
REGULAR COLORS
W white
GR granite
BE beige
R red
BL blue
Y yellow
|
|
ASSEMBLY
Assembly is extremely easy.
All necessary hardware is included.
|
|
MATERIALS
The material we use is a composite multi-layer techno-polymer, and the process involved (CO-INJECTION system) is the highest standards in plastic manufacturing in order to produce a hard, shiny skin which engolfs the foamed core. The characteristics of the SAN skin make the product solid, glossy and resistant, and no paints or varnishes are required for finishing. The inner expanded closed cell modified ABS resin has high mechanical resistance and behaves like a bone adding exceptional strength to the toilet seat. Our toilet seats are anti-bacterial, do not absorb humidity, nor are adversely affected by salts, acid nor grease and are 100% recyclable.
|
|
SHIPPING: Box Dimensions And Weight
RETAIL BOX
box of 1 ea.
19 1/4" x 14 1/2" x 2 1/4"
at 8.5 pounds
MASTER CARTON
5 toilet seats
15 3/4" x 13" x 19 3/4"
at 43" pounds
1 SKID
180 toilet seats
39 1/2" x 47 1/2" x 85"
at 1550 pounds
|
|
TOILET SEATS: IL TONDO 16.5" (US SIZE/ROUND BOWLS)
IL TONDO TOILET SEAT
Top-of-the-line, heavy, solid and shiny seats.
Lenght 16.5 (standard bowls)
Measure toilet seat from front of bowl to center of mounting holes
Beautiful
Luxuriant
Colorful to the eye
Fashionable
Fun with Possibilities
Art meets function
Enjoy leisure while enhancing your home
Heavy luxury fixing
Brass/chrome with wide adjustment range.
Environmentally friendly high-tech 100% recyclable product. The seats are produced with a co-injection process that yields startling color & a smooth blending into an acrylic finish.
Washes with soap and water. They are anti-bacterial in nature. Nothing sticks to these seats.
link
TECH DATA
|
|
COLORS AVAILABLE
TRANSLUCENT COLORS
TS-BL translucent blue
TS-GR translucent green
TS-R translucent red
TS-Y translucent yellow
REGULAR COLORS
W white
GR granite
BE beige
R red
BL blue
Y yellow
|
|
ASSEMBLY
Assembly is extremely easy.
All necessary hardware is included.
|
|
MATERIALS
The material we use is a composite multi-layer techno-polymer, and the process involved (CO-INJECTION system) is the highest standards in plastic manufacturing in order to produce a hard, shiny skin which engolfs the foamed core. The characteristics of the SAN skin make the product solid, glossy and resistant, and no paints or varnishes are required for finishing. The inner expanded closed cell modified ABS resin has high mechanical resistance and behaves like a bone adding exceptional strength to the toilet seat. Our toilet seats are anti-bacterial, do not absorb humidity, nor are adversely affected by salts, acid nor grease and are 100% recyclable.
|
|
SHIPPING: Box Dimensions And Weight
RETAIL BOX
box of 1 ea.
17 1/4" x 14 1/4" x 2 1/4"
at 7.5 pounds
MASTER CARTON
5 toilet seats
15 3/4"x13"x17 3/4"
at 38 pounds
1 SKID
180 toilet seats
39 1/2" x 47 1/2" x 77"
at 1400 pounds
|
|
L'EUROPEO (European Size)
L'EUROPEO
(European Size)
Heavy luxery fixing
Brass/chrome with wide adjustment range
Environmentally friendly high-tech recyclable product
Easy Installation
Top-of-the-line, heavy, solid and shiny seats. Co-injected Toilet Seats are considered an alternative that encompasses all the features of a premium product and is meant to replace polyester coating.
These seats are manufacturerd with a composite multi-layer techno-polymer mixture of ABS and SAN resins in order to produce a hard, shiny skin which engolfs the foamed core. The characteristics of the skin make the product solid, glossy and resistant, and no paints or varnishes are required for finishing. The foamed core give the seat thickness and weight with less material. The closed cell core does not absorb humidity, nor is it adversely affected by salts, acid and grease. Finally, this product is 100% recyclable.
7 YEARS GUARANTEE!!!!
Every Drake sanitary product is guaranteed against defects in material and workmanship. If this product is defective, your exclusive remedy will be a replacement product of equal value. Expenses for removal and replacement not covered.
link
TECH DATA
|
|
DIMENSIONS
L'Europeo toilet seat is designed for the European market.
Size fits standard European toilet bowls.
Dimensions on the drawing are expressed in CM
|
|
COLORS AVAILABLE
TRANSLUCENT COLORS
TS-BL translucent blue
TS-GR translucent green
TS-R translucent red
TS-Y translucent yellow
REGULAR COLORS
W white
GR granite
BE beige
R red
BL blue
Y yellow
|
|
ASSEMBLY
Assembly is extremely easy.
All necessary hardware is included.
|
|
DATABASE NEWS & PRESS PRINTOUT
|
FOLDING CHAIR LINK & SPACER:
You need space!!! Sometimes linking chairs together is mandatory.
Whenever you link chairs without spacing, you oblige guests to
squeeze in a 17/18 chair. They need space!!!
With our link & spacer device, you can give 3 more comfort to your
customers and guests so that the feeling is to sit on a wider space.
This is an accessory that complements the current line of our top of the line folding chairs and is usable on the following models:
Structure, Fan, Chateau & Louis.
FEATURES
Snap on, NO TOOLS required
Leaves 3 between linked chairs
Stacks for storage
Engraved 3 3/4 x 1 1/2 Drake Logo could be replaced by your logo for a one time set up fee
Placeholder can be used with business card, advertising card, reserved seating card, row and seat number card, event card. Customize the event/seating using Averyฎ Clean Edge Business cards 2x3 1/2
link
|
CHATEAU AND LOUIS - let our new high decorative back folding chair designs complement your tabletop
Chateau & Louis by Drake, with their high decorative back towering the tables and their classical rich lines, will stand out and look fabulous whatever the setting. Whether used with additional decorations or simply bare, the Chateau or the Louis by Drake will bring high class event sophistication with the ease of handling of a folding chair.
The technology for the Chateau and for the "Louis" is the same as our traditional Structure folding chair, Co-injection technology with an aesthetic outer skin as well as a solid foam core.
Features:
Super lightweight.
Strong and secure.
Patented stacking and interlocking system.
Ultra bright white color. (Other colors will include black, silver and gold.)
These chairs will better dominate the table set up due to the 41.5 long design.
link
|
CHAIR TO CHAIR PROGRAM: Drake turns Green
Drake was with no doubt the First to make the white resin folding chair in 1999.
After 10 years and more than a million chairs made, we will be introducing to the market an idea which will reflect our real commitment to the environment.
Since the beginning, we have been advertising that our chairs are recyclable. In speaking with our customer we have realized that they almost last forever. However some (very few) are so old and abused that they need to be retired.
With this in mind in the beginning of 2009 we will start our new chair to chair program. We will retrofit them into brand new chairs (the colors available will be only beige, gray, aquamarine and mauve) bringing them back into the circle of life.
Of course this program accepts only Drake chairs or chairs made under Drakes license. We need to be sure of the material used as they will be reborn with our label and guarantee.
In a struggling economy and in hard and uncertain economic times, DRAKE is proud to say that our products are Made in the USA and we continue to contribute to and support the U.S. economy with cost-effectiveness and by creating jobs.
link
|
Classic American Wedding Chairs finally MADE IN THE USA!!!
Take the best materials and the best technology. Move everything to North Carolina, hire the very best people... here you have yet the best chairs ever by Drake!!! Extra lightweight for easy transportation @ 10 lb.. only, extra strong for heavyweight, low maintenance and long lasting to make you profitable... It was a dream, now it is real. Drake started manufacturing resin folding chairs in the USA early this year and running at full speed since March, with additional expansions with the addition of another production line early in the summer.
Beside providing the most reliable folding chairs on the market, Drake offers a huge range of seating solutions for the special event and catering market.
Reliable resin Chiavari chairs that require very low maintenance for outdoor/indoor use as well as the upscale contemporary design of Elle and Tre3 chairs and barstools, make the "which chair should I buy" selection process though. Do not despair however, any choice will be good as long as there's Drake name stamped on that seat, whether made in the USA, or made in Italy, top quality and reliability are covered.
link
|
EVENT CHAIRS: A room with a view
By "Sara Sturges"
CATERING MAGAZINE
In producing an event with a contemporary feeling, the choice of flowers, linens and food all contribute; but dont forget the furniture.
Art-deco is the buzz word and it can be accomplished easily by adding mod barstools, which have gained popularity as an option for seating at events. Upscale cocktail parties, chic birthday soirees and modern corporate events provide the perfect setting for eye-catching furniture.
Drake Corp., a manufacturer of event chairs and tables, boasts a swarm of chair options, including high quality resin folding and resin stacking chiavari chairs. Besides traditional event seating, Drake can supply its newest additions, the Elle and Tre3 stacking barstools, which have us jumping out of our seats!
Glam-up a setting by adding stools from Drakes Elle collection, made of multilayered techno-polymer seats with a chrome metal frame. This collection isnt for the timid. Available in sleek New York colors like white, light gray, red and black; Elle stools are linear and simple, yet elegant and modern.
The Elle stool is stackable, eliminating tricky disassembling for storage purposes. The compact stacking system is designed with a special soft mount that protects the stools as they rest on one another.
Inspired by modern art and architecture, one would think the Elle stools could not withstand much rough handling, however, through rigorous testing, they prove capable of managing the abuses involved with heavy commercial use.
Elle stools are available in the Cuoio series, which offers an upgraded, luxurious touch by substituting a leather seat. The handcrafted midgrain leather comes in 19 colors and is made to order only.
The Tre3 stools are made of multilayered techno-polymer with a chromed metal frame. Available in white, light gray, red and black, this collection is contemporary and sexy without sacrificing comfort. Its resistant to scratches and chips and impervious to stains and tears. This collection has all the durability of a metal chair with more style than most upholstered chairs. Both the Tre3 and the Elle are also available in a low-back chair with all the same features and options.
For information, call 732.254.1530 or visit www.drakecorp.com.
link
|
DRAKE CHIP STRONGER THAN SIMILAR CHAIRS WITH METALLIC INSERTS!!!
Chip chairs are even stronger than the COMPETITION's BEST CHAIRS with LEGS REINFORCED WITH METALLIC INSERTS both in static weight tests and dynamic weight tests (Chair Drop Functional Load A 300 lb weight is positioned 6 above the seat of the chair and allowed to free-fall onto the center of the seat).
Just to give you an idea:
STATIC/vertical static load testings:
Chip chairs average load before failure: 2200 lb.
Competition best chair average load before failure: 1500 lb.
DYNAMIC/with a 300lb. weight drop @ 6" above center seat:
100% Chip chairs remain intact
60% of the competition's best chairs fail (the seat breaks)
For more information, Please read the detailed report on Chairs with metallic inserts:
view testing details
link
|
DRAKE RESIN CHAIRS CONSTANTLY EVOLVING
East Brunswick, N.J.-based Drake Corporation helps make your off-premise events easier to accommodate with strong, durable stackable chairs.
When a product passes the California Technical Bulletin 133 (TB133) test, manufacturers feel secure about seating guests safely. This procedure requires upholstered seating units to pass a full-scale open flame burn test. Named after the process, Structure TB133 chairs are the perfect settee for your next off-premise event.
Additionally, Structure TB133 chairs are foldable and stackable making transportation and storage simple. With an interlocking feature, the chairs can be stacked horizontally or vertically.
The Chiavari FG chairs are made of a new mix of techno-polymer material, making it strong and light at the same time. The traditional appearance will fit in at any off-premise affair.
Chiavari FG chairs are available in black, white, silver and gold, and are weatherproof and UV protected.
Drake chairs are 100 percent recyclable, unlike chairs with metal inserts, and there is no need to give them a touch up with additional paint as color is consistent to the core.
All Drake products shipped in the United States come complete with a lifetime warranty on defects in the material and workmanship.
by
Amy Lorenzen
As seen in Catering Magazine
link
|
WHEN ART IS EXPRESSED IN A TOILET SEAT
In Jan. 2006 in Orlando at the Builders show, Drake Corp. introduced its new line of toilet seats for the US market.
Made in two sizes, IL TONDO (the round one) 16.5 inches long, and IL LUNGO (for elongated bowls) 18,5 inches long, they are made of a multylayer technopolymer ABS & SAN based.
Beside the range of standard colors, it was highly praised and enthusiastically welcome the introduction of translucent colored toilet seats.
Whether it's a formal dinner,
a wedding party,
or a bathroom "throne"...
Drake always provides the best seating!!!
Get the best...
from Drake only!!!
Available in JAN. 2006
link
|
NEW 2006 STRUCTURE TB133,
PUBLIC SEATING AT ITS BEST...
STRUCTURE TB133 is a SPECIAL VERSION of our popular Structure chair made to comply with PUBLIC SEATING FIRE requirements (TB133).
More and more Administrations are requesting public seating to comply with standard fire codes, and we came out with a plastic chair that is easy to use, is tough and now also TB133 compliant!!!
Just like the original model, Structure TB133 chairs are folding, stacking (horizontally and vertically), and come equipped with an interlocking feature that makes moving and storing them quite simple. They are strong, durable, weatherproof, don't need painting and require very little maintenance.
For STRUCTURE TB133 the materials of the chair itself have been upgraded to:
Outer Material: PP Fire rated
PAD/plastic seat board: PP Fire rated
PAD/Seat Foam: PU Fire Resist. Class 1/M
PAD/Vinyl Cover: 100% PVPP-PVC Fire Resist. Class M2
STRUCTURE TB133 are made to order, please allow 6 weeks delivery time and make sure that you specify TB133 when placing the order for Structure TB133 compliant.
Get the best...
from Drake only!!!
Available in JAN. 2006
link
|
New Hot (Thermic) Pizza Bags for take out orders fit 16" pies!!!
Finally in stock and ready to ship, our new hot bags for carry out orders fit 16" pizza boxes.
The 2.5" bottom gusset keeps the overall dimensions of the bag at a minimum (20"x20"+2.5).
Features:
reusable
strong
highly isothermic
micro-holes to avoid condensation
ECONOMICAL
Hot Pizza bags are made of a three layer material:
outer= 18ต PP coex metallic
medium= PE Foam
inner= 10ตHDPE
link
|
NEW 2006 DRAKE CHIAVARI CHAIRS:
TECHNO-POLYMERS RULE!!!
The aesthetic respects the traditional look but...
deep inside Drake Chiavari stacking chairs have been re-engineered ground-up.
The NEW MIX of techno-polymers they are made of, makes them exceptionally strong, sturdy and a far better alternative to a plastic chair with a metallic insert, at a fraction of the weight.
NEW DRAKE CHIAVARI STACKING CHAIRS:
EXCEPTIONALLY STRONG & STURDY
LIGHTWEIGHT
EASY HANDLING AND LOW COST MAINTENANCE
Get the best...
from Drake only!!!
Available in JAN. 2006
link
|
THREE LEGS are better than four:
TRE3 chair and nesting table,
a designer dream for the contract industry.
TRE 3
Drake Corp. has stepped forth with a new revolution for the furniture industry. With the advent of the Tre 3 chair Drake has shown a willingness to work with artists, architects and designers in a medium of furniture making that until now has been virtually unexplored. By making contemporary chairs out of an advanced composite multilayer technoplymer Drake can turn even the wildest artists dream into reality. By eliminating the constrains of working in wood, Drake limits its ability to produce chairs to that of the imagination. Even the most dramatic and radical chairs can now be produced quickly and efficiently with even more durability and strength than conventional materials. Drake can turn an artists dream into an actual product in production in months.
Designed by up and coming architects and designers L. Nichetto & C. Tinti, the Tre 3 seamlessly integrates classic geometrical styling with new age elegance to create a look that seems to defy gravity.
The Tre 3 line sets a new standard for furniture as functional art and its design has no compromise between style and function, beauty and strength.
The Tre 3 chairs and tables are stackable and there is no folding, disassembling or tricks of any kind to prepare them for storage simply stack and forget, designed with a special soft mount stack system that actually protects the chairs as they nest into one another.
The minimalist tri support system gives the chair its floating look and strength, while it may look like a delicate piece of art it has been designed and rigorously tested to take the abuses involved with heavy commercial use.
Resistant to scratches and chips and impervious to stains and tares these chairs have all the durability of a metal chair with more style than most upholstered chairs.
link
|
NEW FAN CHAIR By Drake
Fan are well known folding and stacking chairs by Drake.
The new Fan chairs by Drake, are now manufactured with the back completely integrated into the chair frame.
The decision to move toward this solution, was made both to increase the comfort of the back, and improve the aesthetics of the chair.
In the new chair, the materials of the back and the frame are now consistent in resistance and color.
The back is very flexible to meet higher comfort standards and to make the entire chair more impact resistant at the same time.
The new backs have furthermore been designed to have a smooth surface that's not textured, which makes it much easier to clean.
Texture is known to be used in plastic to hide defects. As we do not need to hide anything... we decided to ease up the life of the people that work with our products lifting the Fan chair to new, higher standards!!!
link
|
Vital Issues
that must be taken into consideration
when investing in a resin chair
Do you have a list of features that must be accounted for when you are purchasing a chair? Well, we can help you out with it.
When you invest in a resin chair, make sure that:
It is a bi-component chair, which means that you have strength on the inside and a cosmetic surface all over, with the same color, same material and the same type of finish on the legs as well as on the seat frame.
The weight is no more then 10 pounds, including padded seat, because you want it strong but light.
Your padded seat has a resin frame, because you want it more flexible and more comfortable.
Why sit on a rigid piece of wood?
Your padded seat is snap-in, snap out type. Why use screws and lockers which might rust?
The chair has been tested for 500 pounds because safety, reliability and peace of mind is a must.
link
|
Party Chairs:
Chip and Structure
"Chip" and "Structure" by Drake, seem to be the ideal and most popular chairs at the present time in the party business. Easy to clean and maintain, they sure can make every party a success looking good every time. Furthermore, as they fold, stack and interlock with ease they can be handled and stored in a snap. Do not be fooled by the light weight (only 10 lbs. per chair) that makes the transportation and set up of these chairs almost a pleasure. Their unbelievable strength has been tested at 500 lbs for the peace of mind of the party rental operators.
link
|
Special Event World:
the FAN invasion!!!
Drake Fan chairs, are the most promising folding chairs of the Special Event world. The challenge is to chase people off the chairs once they try them.
Due to the high back, they provide a seating comfort unparalleled by most of the other folding chairs.
Strong and sturdy (tested at 500lbs.) they fold, stack and interlock making their handling and storage quite an easy task.
Stacking is an important feature, as most similar high curved back chairs require to be hanged on racks for storage.
White and black colors are now finally shipped in large quantities too. Please reserve your chairs as soon as possible as the lead time is 2 weeks approx.
link
|
Do you expect anything new in 2003?
At Drake's, we do!!!
Sometime the Event industry demands a traditional look, some other novelties.
Whether you are tired of the traditional looking chairs, or you just want to add a new design and spice up your inventory well have a new chair hitting the market very soon. It's name is FAN.
The new Drake Bi-component resin comfortable high back, folding, stacking and interlocking event chair, will be provided in a variety of colors.
Seat and back colors can match or contrast the chair frame.
You can actually purchase more seat and back inserts to meet different event needs.
Beside the increased comfort, the newly born chair inherits the usual Drake chair characteristics: low maintenance, ease of handling, and exceptional strength.
What can you ask more?
link
|
Where is the chair rental market headed?
At Drake corp., the company that introduced the first high quality resin chairs into the rental market, we are proud to answer: "resin products, without any doubt".
Despite initial hesitation, nowadays more and more rental operators are switching to high quality resin seating solutions for both folding and chiavari ballroom chairs. They are fully aware of the advantages of it.
Almost anyone that has dealt with wood chairs knows the high costs of painting, and the higher cost of customer dissatisfaction, when "less than perfect" chairs are employed in an event.
The look is important, and handling products that look great 100% of the time is priceless.
Ease of handling is definitely met since all of the resin chairs are provided with interlocking features.
The possibility to stack the chairs, without any fear of scratching them is a relief, and stacks of interlocked chairs can be moved and stored much easier.
Among the benefits of chair stack handling are easier inventory counting, and clean, professional neat looking warehouses.
Drake Corp. provides a line of accessories to handle and store chairs, like chair pallets and stack covers.
At last, but not least: strength.
Resin chairs have proved to be stronger and safer than wood ones. The materials they are made of, together with the different distribution and discharge of the weight load makes them tough .
At Drake Corp. we constantly work with our customers to improve products and to be able to provide complete solutions from A to Z for their seating needs. We can proudly say that the expert and constant feedback of our customers drives us to excellence.
We make chairs for you to enjoy using and working with, hassle free.
link
|
|
|
